Jands HUB 24, Руководство по эксплуатации

Страница: 44 / 46

38 Using the Dimmer Utility
Operating Manual HUB24 Series Dimmer
Redo
On the Edit menu click Redo (or click the redo icon) to reverse the action of the last
undo. Each click reverses one more undo.
Blank
Blanks the entire logo (sets all pixels to white), this is used to start drawing a new logo.
On the Edit menu click Blank (or click the blank icon) to blank the logo.
Saving a Logo
The logo that is currently in the logo generator can be saved as a file on the computer.
1. On the File menu, click Save to open the “Save As” dialogue box.
2. From the Save in drop down list select the drive the logo will be saved to.
3. Open the folder that is to contain the file, by double-clicking on the folder(s).
4. Type a file name in File name and click Save.
Downloading the Logo to a Dimmer
The logo that is currently in the logo generator can be downloaded to a dimmer directly
from the logo generator.
1. On the File menu click Logo Download (or click the download icon) to open the
logo download window.
2. If a password is required type the same password in both boxes. The dimmer will
reject the new logo if the password doesn’t match the existing password.
3. From the Com Port drop down list, select the serial port that the PC Download
cable is plugged into.
4. Prepare the dimmer so it is waiting to receive a download. See the dimmer’s user
manual for how to do this.
5. Click the Start button to start the download process. The computer will execute
the download whether or not a dimmer is actually connected.
6. A progress bar will be shown at the bottom of the window. A logo will take about
2 seconds to download.
7. When the “Download Complete” dialogue box appears, click OK and check the
dimmer to see if the download was successful.
8. Click the Close button to return to the logo generator.
The password is optional until one is downloaded into the dimmer. Once the dimmer
has a password it must be remembered or it will not be possible to change the logo.