ii
Contents
Operating Manual
HUB24 Series Dimmer
EMC COMPLIANCE
This product is approved for use in Europe and Australia / New Zealand and conforms to the following standards:
European Norms
Australian / New Zealand
Standards
EN 50081-1
AS/NZS 4252.1
EN 50082-1
AS/NZS 4251.1
EN 60065
AS/NZS 3260
To ensure continued compliance with EMC Directive 89/336 and the Australian Radiocommunications Act 1992, use
only high quality data cables with continuous shield, and connectors with conductive backshells. Examples of such
cables are:
DMX:
Belden 8102
100% Aluminium foil screen, 65% Copper braid.
JANDS ELECTRONICS PTY LTD 2002
All rights reserved
DISCLAIMER
Information contained in this manual is subject to change without notice and does not
represent a commitment on the part of the vendor. JANDS ELECTRONICS Pty Ltd
shall not be liable for any loss or damage whatsoever arising from the use of
information or any error contained in this manual.
It is recommended that all service and repairs on this product be carried out by JANDS
ELECTRONICS Pty Ltd or its authorised service agents.
JANDS HUB24 Series dimmers must only be used for the purpose they were intended
by the manufacturer and in conjunction with this operating manual.
JANDS ELECTRONICS Pty Ltd cannot accept any liability whatsoever for any loss or
damage caused by service, maintenance or repair by unauthorised personnel, or by use
other than that intended by the manufacturer.
Disconnect power when not in use.
Manufactured in Australia by:
JANDS ELECTRONICS PTY LTD
ACN 001 187 837
40 KENT RD
Locked Bag 15
MASCOT NSW 2020
AUSTRALIA
PHONE: +61-2-9582-0909
FAX:
+61-2-9582-0999
EMAIL:
WEB:
www.jands.com.au
Содержание HUB 24
Страница 1: ......
Страница 8: ...2 Equipment Description Operating Manual HUB24 Series Dimmer Figure 2 1...
