Setup
XG4
User Manual
Janam Technologies LLC Version 2, September 2021
XG4 Setup 3—1
Removable Memory
IMPORTANT NOTE!
To avoid possible damage to microSD cards or the XG4 itself, ESD (electrostatic
discharge) precautions are recommended when installing or removing microSD cards.
Before handling, discharge any personal static electric buildup to a point of discharge
other than the device.
microSD Card
About microSD Cards
The XG4 rugged touch computer has a microSD flash memory card slot in its battery compartment
that is compatible with SDXC (Secure Digital Extended Capacity) cards with capacities of up to 2TB
(exFAT32 card formatting). Older SD and SDHC cards can also be used. Removable microSD memory
is useful for general file storage, uploading and downloading of user data, and more. The use of high-
quality microSD cards supplied by a reputable manufacturer is recommended.
To access the microSD card slot:
Remove the XG4 mobile computer’s battery, by pressing and holding the left and right battery looks
together with one hand, and then use the other hand to lift the battery out of its compartment.
To install the microSD card:
Lift up the black protective rubberflap as shown in the photo to the right. Locate the microSD card
slot in the battery compartment (highlighted orange). Place a compatible microSD card with its brand
and capacity markings facing you and its
smaller edge going into the card slot. Fully
insert the microSD card. DO NOT attempt to
insert the microSD card in any other
orientation. Put the battery back into its
compartment and put the battery
compartment cover back on.
To remove the microSD card:
Before removing a microSD card, Go to
Settings
>
Storage and USB
>
SD card
.
Tap the eject symbol and the card will be
unmounted. Then remove the battery
compartment cover, remove the battery, and
gently remove the microSD card.
XG4 Setup
3