11
Set contents (included by RTF Version)
The CX 2.4 GHz set comprises of the 4 channel transmitter with
matching 6 channel receiver and these instructions.
Recommended Accessories
In order to operate a radio controlled model you will also require
servos suitable for your model, a receiver battery, an ON/OFF switch
with cable and a charging cable. If you model is electrically pow-
ered, you will also require an ESC, which will normally also supply
power for the receiver.
Use only high-quality components with this system such as those
found in our product range which can be seen either within our
catalogue or on the Internet at www.jamara.com
General description
Our CX 2.4 GHz system works on the ISM Band. This ‚new‘ Band
offers several advantages of which probably the most useful is that
no crystals are required because the transmitter and receiver have
to be bonded meaning that your model cannot be ‚shot down‘ by
other users on your channel. Apart from that this is a much cleaner
and interference free signal anyway. This does however mean that
you have to bond all of your receivers to your transmitter but this is
a small price to pay for peace of mind.
Transmitter:
The transmitter is available with the throttle on the left side (mode
1) or the right side (mode 2) and is fitted with high quality stick
units. The transmitter is powered by 8 AA sized cells and is equipped
with an acoustic signal to warn when the batteries are beginning to
go flat which prevents a loss of power and thereby a loss of signal
if the batteries were allowed to discharge too far. In light of this,
always land the model as soon as you hear the signal and re-charge
or replace the cells.
The servo direction of rotation can be changed on all 4 functions.
Set Contents
(included by RTF Version)
Recommended Accessories
Schalter
Antenna
Carrying handle
Neck strap eye
Throttle and
aileron stick
with trim
Power LED
Switch
Servo Reverse
Switches
Bonding button
Trainer
socket
Elevator and
rudder stick
with trim
Antenna
Carrying handle
Neck strap
eye
Elevator and
rudder stick
with trim
Power
LED
Switch
Servo Reverse
Switches
Bonding button
Trainer
socket
Throttle and
aileron stick
with trim
Mode 1
Mode 2
Normal/Delta mixer
Normal/Delta mixer
