Jaden DLB1-0004T4G, Инструкция по эксплуатации

Страница: 95 / 173

-95-
28 28=E.USt2 User defined fault2
29 29=E.APA Power-on timereached
30 30=E.ULF Load becoming 0 fault
31 31=E.PID PID feedback lost duringrunning
40 40=E.CbC IGBT current limiting fault
41 41=E.tSr Running motor switchover fault
42 42=E.SdL Speed deviation too large
43 43=E.oSF Motor over speed
45 45=E.oHt Motor over heat
51 51=E.PoSF Initial position fault
P9.17
Frequency upon 3rd fault
It displays the frequency when the latest fault
occurs.
●
P9.18
Current upon 3rd fault
It displays the current when the latest fault
occurs.
●
P9.19
Bus voltage upon 3rd fault
It displays the bus voltage when the latest
fault occurs.
●
P9.20 DI status upon 3rd fault
It displays the status of all DI terminals
whenthe latest fault occurs.
The sequence is as follows:
If a DI is ON, the setting is 1. If the DI is
OFF, the setting is 0. The value is the
equivalent decimal number converted from
the DI status.
●
P9.21
Output terminal status upon
3rd fault
It displays the status of all output
terminalswhen the latest fault occurs.
The sequence is as follows:
If an output terminal is ON, the setting is 1.
If the output terminal is OFF, the setting is
0. The value is the equivalent decimal
number converted from the DI statuses.
●
P9.22
3rd faultinverter status Reserved
●
P9.23
Power-on time upon 3rd
fault It displays the present power-on time when
the latest fault occurs.
●
P9.24
Running time upon 3rd fault
It displays the present running time when the
latest fault occurs.
●
P9.27
Frequency upon 2nd fault
It displays the frequency when the latest fault
occurs.
●
BIT9 BIT8 BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1
DI2 DI3 DI4 DI5 DI6 DI7 DI8 DI9 DI0
BIT4 BIT3 BIT2 BIT1 BIT0
FMP REL1 REL2
DO1
DO2