Jaden DLB1-0004T4G, Инструкция по эксплуатации

Страница: 35 / 173

-35-
P0.07
Frequency source
combination mode
One’s
place
Frequencysource selection 00
☆
Main frequency source X
0
X and Y operation
(operation relationship determined by Ten’s
place)
1
Main frequency source X and Auxiliary
frequency source Y switchover
2
Switchover between X and "X and Y
operation"
3
Switchover between X and "Y and Y
operation"
4
Ten’s place
X and Y operation relationship
X+Y 0
X-Y 1
Maximum value
2
Minimum value
3
It is used to select the frequency setting channel, flexibly satisfying various requirements.
P0.08
Keyboard setting
frequency 0.00Hz~ maximum frequency(valid when
frequency source is digital setting)
50.00Hz
☆
When frequency source selection is “digital setting” or “terminalUP/DOW N”, this valueis inverter
frequency digital setting initial value.
P0.09
Operation direction
selection
Same direction 0
0
☆
Reverse direction
1
You can change the rotation direction of the motor just by modifying this parameter without changing
the motor wiring. Modifying this parameter is equivalent to exchanging any two of the motor's U, V, W
wires.
The motor will resume running in the original direction after parameter initialization. Do not use this
function in applications where changing the rotating direction of the motor is prohibited after system
commissioning is complete.
P0.10
Maximum output
frequency
50.00Hz~320.00Hz 50.00Hz
★
When the frequency source is AI, pulse setting (DI5), or multi-reference, 100% of the input
corresponds to the value of this parameter.
The output frequency of the DLB1 can reach up to 3200 Hz. To take both frequency reference
resolution and frequency input range into consideration, you can set the number of decimal places for
frequency reference in P0.22.