Jaden DLB1-0004T4G, Инструкция по эксплуатации

Страница: 72 / 173

-72-
5 Output voltage 0 to 1.2 times of rated Inverter voltage
6 Pulse input 0.01-100.00 kHz
7 AI1 0-10 V
8 AI2 0-10 V (or 0-20 mA)
9 AI3 0-0 V
10 Length 0 to maximum set length
11 Count value 0 to maximum count value
12 Communication setting 0.0%-100.0%
13 Motor rotational speed
0 to rotational speed corresponding to
maximum output frequency
14 Output current 0.0-1000.0 A
15 Output voltage 0.0-000.0 V
16 Output torque (actual value)
-2 times of rated motor torque to 2 times of
rated motor torque
P5.09
Maximum FMP output
frequency
0.01kHz~100.00kHz 50.00kHz
☆
If the FM terminal is used for pulse output, this parameter is used to set the maximum frequency
of pulse output.
P5.10
AO1 zero offset coefficient -100.0%~+100.0% 0.0%
☆
P5.11 AO1 gain -10.00~+10.00 1.00
☆
P5.12
AO2 zero offset coefficient -100.0%~+100.0% 0.00%
☆
P5.13
AO2 gain -10.00~+10.00 1.00
☆
These parameters are used to correct the zero drift of analog output and the output amplitude
deviation. They can also be used to define the desired AO curve.
If "b" represents zero offset, "k" represents gain, "Y" represents actual output, and "X" represents
standard output, the actual output is: Y = kX + b.
The zero offset coefficient 100% of AO1 and AO2 corresponds to 10 V (or 20 mA). The standard
output refers to the value corresponding to the analog output of 0 to 10 V (or 0 to 20 mA) with no zero
offset or gain adjustment.
For example, if the analog output is used as the running frequency, and it is expected that the
output is 8 V when the frequency is 0 and 3 V at the maximum frequency, the gain shall be set to -0.50,
and the zero offset shall be set to 80%.