Jacuzzi frame 100, Руководство по установке

Страница: 10 / 60

10
the purpose of disconnecting the appliance from the
mains.
Q
For connection to the electric mains, you will need to install
an isolating multi-pole switch, which will ensure complete dis-
connection in the instance of a category III over voltage; these
devices must be connected to an area that complies with the
safety regulations governing bathroom safety.
Switches and electrical devices, according to regula-
tions, must be connected to areas out of the user's
reach.
Q
The installation of electrical devices and equipment (sockets,
switches, etc.) in the bathroom must be in compliance with legal
standards and regulations in the country where the appliance is
installed.
If the building’s electrical system is not able to guar-
antee a stabile power supply, it is recommended to
install a voltage stabiliser that suitably dimensioned
for the required power upstream of the equipment.
Q
To connect the building's electrical system, you must use a
cable protected with a sheath with characteristics not inferior to
H 05 VV-F 3x2.5 mm
2
.
The building's electrical supply must be equipped
with a differential switch with operating current
which does not exceed 30 mA.
Q
Frame shower enclosures have a terminal identified by the
symbol , placed on the back of the frame for equipotential
connection of the surrounding metal masses (standard
EN
60335.2.105
).
Q
The appliance is equipped with an LED lighting system in
compliance with Norm
EN 62471:2009
, lamp classification
group: exempt.
Do not look directly at the light using optical devices (bin-
oculars, cameras, magnifying glasses).
ATTENTION! Before carrying out any maintenance
operations, disconnect the appliance from the power
supply line.
JACUZZI EUROPE S.p.A. denies all responsibility:
- If installation is carried out by unqualified personnel and/or per-
sonnel unauthorised to carry out the installation itself.
- If current norms and legal provisions regarding the electric sys-
tems of buildings in the country in which installation is carried out
are not complied with.
- If the instructions for installation and maintenance contained in
this manual are not followed.
- If unsuitable and/or uncertified materials are used for installa-
tion.
- If shower enclosures are placed in areas which do not comply with
the above-quoted standards.
- If incorrect operations are performed that reduce the level of pro-
tection of the electrical equipment against water jets, modify the
protection against electrocution due to direct or indirect contact,
or produce abnormal conditions of insulation, current leakage or
overheating.
- If any components or parts of the appliance are altered in rela-
tion to the original state when supplied, releasing the Manufacturer
from any liability.
- If the appliance is repaired by unauthorised personnel or if spare
parts are used other than the original ones supplied by Jacuzzi Eu-
rope S.p.A.
10