Jacuzzi Experience Enjoy, Инструкция по эксплуатации

Страница: 20 / 44

It is the responsibility of the installer/owner to ascertain
compliance with specific local regulations prior to installa-
tion.
Jacuzzi Europe S.p.A. gives no guarantee in this respect
and refuses all responsibility regarding compliance of the
installation carried out.
Technical Features
Enjoy Experience ( 1 ) includes:
- a control unit, called “Spa-Pak” ( 1, A ) .
NOTE: it is possible to additionally add a spa-pak “booster kit”
(optional,
2-2a-3-3a
) to be connected to the one
supplied as standard; refer to the relative documentation.
- the compensation tank ( 1, B ) which, once connected, is
required to hold water that overflows when users get into the tub.
Its nominal capacity is 1,000 litres (operating with about 800-850
litres).
- the Minipool (
1, C ), is to be connected, with hoses, to the “Spa-
Pak”, the compensation tank and the drain.
MAXIMUM ABSORPTION FOR THE SYSTEM
SINGLE-PHASE BASE
• version with heater
• version with exchanger
SINGLE-PHASE TOP
• version with heater
• version with exchanger
THREE-PHASE TOP
WEIGHTS
Heat exchanger (optional)
- MAX primary circuit temperature .............................................................50 °C
- Connections.....................................................................................................................3/4”
- Primary circuit flow rate ..............................................................................38 l/min
- Primary pressure drop .....................................................................0,271 m H2O
Components
Components and the necessary connections for setting up the system
are described below (see
2-2a-3-3a ).
Minipool and hosing
1
overflow channel with grid
2 pneumatic buttons
2a box for connection of pneumatic buttons
3 low-point drain with gate valve
4A1+4B1
to the compensation tank (overflow lines)
4A2+4B2
to the compensation tank (overflow lines)
5 hydromassage pump suction lines
6 hydromassage pump delivery lines
7 filtering suction line
8 suction line from the compensation tank
9 filtering return line
10 blower line
11 connections to the water system
12 perimeter metal supports
Spa-pak
13 (13a)
Electric wiring box
14 optional - 14b : heater or 14a : heat exchanger
15 hydromassage pumps
16 filtering pump
17 blower (where present)
18 quartz sand filter
19 safety switch
20 temperature sensor
21 flow switch (models with heater)
Compensation tank
22
water loading/filling solenoid valve (3/4”)
23 level switches
220-240 ~
Total consumption
hydro + fil heater (3 kW)
kW Ampere Hertz
5,15 (j) 23 (k)
Volt
Power supply (x)
(single-phase)
50
50
Power supply (x)
(single-phase)
Volt
8,8 (k) 1,95 (j)
Hertz Ampere kW
(k): at 230 V (single phase) - (j): power absorption
(x): see the “electrical preparations” chapter
Total consumption
hydro + filtering
220-240 ~
50
Power supply (x)
(single-phase)
Volt
25,5 (k)
5,75 (j)
Hertz Ampere
kW
Total consumption
hydro + fil heater (3 kW)
220-240 ~
50
Power supply (x)
(single-phase)
Volt
19,5 (k) 4,25 (j)
Hertz Ampere kW
(k): at 230 V (single phase) - (j): power absorption
(x): see the “electrical preparations” chapter
Total consumption
hydro + filtering
220-240 ~
50
Power supply
(three-phase)
Volt
45 17
(j)
Hertz Ampere kW
(*): special standard (not valid for Europe) (j): max. power absorption
Total consumption electric heater
( 12 kW ) +pumps+lights
13 5
(j)
Ampere kW
Total consumption only pumps and
lights (heat exchanger version)
220 - 240 3~
(*)
50
26
17
(j)
8
5
(j)
380 - 415 3N~
net weight
average volume
of use
MAX water
volume
max. total
weight
kg
litres
litres
kg
~ 250
~ 1700 ~ 2100 ~ 2350
area involved resting surface
average load on area
involved
concentrated load on
resting surface
m 2
m 2 kg/m 2 kg/m 2
6,25
1,13 376 2080
max weight
at full load
ground resting
surface
ground
load
LOWERED
RETAINER
TUB
MINIPOOL
SPA-PAK
kg m 2 kg/m 2
~ 900 ~ 1,8 ~ 500
~ 285 ~ 1,1
~ 260
RETAINER
TUB
~ 925 ~ 1,2 ~ 770
20