Jacto Advance 2000 AM-18, Руководство оператора

Страница: 18 / 118

1-18
1
ADVANCE 2000
PR
EC
AU
TIO
N
S
Cautions during component assembly
Warning for adjusting and connecting PTO shaft to the tractor
• Refer to the tractor user manual before
performing this operation.
• Turn off the tractor diesel engine, apply
the parking brake and remove the starting
key from the contact keyhole before
coupling the PTO shaft to the tractor PTO.
• Try to couple the PTO shaft to the tractor PTO.
If necessary to adjust the PTO shaft length,
use the PPEs specific to this operation such
as: goggles, gloves, boots, etc.
• When coupling the PTO shaft to the
tractor, make sure that the safety pin is
securely locked.
• Directions on how to properly adjust
the PTO shaft length will be described in
chapter 2 “ASSEMBLY” of this manual.
• After length adjustment, clean and
lubricate the PTO shaft components.
Wear safety gloves for this operation too.
• Never use a PTO shaft not fitted with
shroud.
• The PTO shaft will be adjusted to its
specific use on the Jacto BC 610 PEC
equipment. Use of the PTO shaft on any
other equipment is not recommended.
• Do not perform adaptations for reutiliza-
tion of the PTO shaft.
• Fasten the PTO shaft covering safety chain
to the tractor; that chain will prevent the
PTO shaft covering from turning together
with the PTO shaft.
• Before actuating the tractor PTO, fill the
main reservoir.