background image

3 SAFETY

en-9

3.1.8 IMPORTANT SAFETY NOTES _______________________________________________

This safety alert symbol gives a warning of possible hazards.

DANGER

 - Indicates a dangerous condition that WILL cause death or injury unless it is prevented.

WARNING

 - Indicates a dangerous condition that CAN cause death or injury unless it is prevented.

CAUTION

 - Indicates a dangerous condition that can cause injury and property damage unless it is prevented. The 

label can indicate work procedures that are not safe.

NOTICE

 - Indicates a condition that can cause damage to the property unless it is prevented. The label can indicate 

work procedures that are not safe.

Some illustrations in this manual show the shields, guards or plates, removed. Do not operate this equipment without 
these devices correctly fastened in position.

If additional information or service is needed, contact your Authorized Jacobsen Dealer. Your Dealer knows the current 
methods to service this equipment.

 

WARNING

The Interlock System on this mower prevents the operation of the mower 
unless a.) The parking brake is engaged. b.) The PTO switch is in the OFF 
position and c.) the traction pedal is in the Neutral position. The system will 
stop the engine if the operator leaves the seat without:

 a.) The parking brake engaged and

b.) the PTO switch in the OFF position.

NEVER operate the mower unless the Interlock System operates correctly.

 

WARNING

1.

Before you leave the operator position, for any reason:

a.

Return the traction pedal to Neutral.

b.

Disengage all drives.

c.

Lower the mowers to the ground.

d.

Engage the parking brake.

e.

Stop the engine and remove the ignition key.

2.

Keep your hands, feet and clothing away from moving parts. Wait for all 
movement to stop before you clean, adjust or service the mower.

3.

Keep persons and animals away from the area of operation.

4.

Never carry passengers.

5.

Never operate the equipment without a correctly fastened grass 
deflector in position.

!

!

Содержание HR-9016 Turbo





























































































Отзывы: