Jackson TEMPSTAR Скачать руководство пользователя страница 26

Страница: 26 / 86

07610-003-61-42-T

PREVENTATIVE MAINTENANCE

MAINTENANCE

PREVENTATIVE

MAINTENANCE

(CONTINUED)

By following the operating and cleaning instructions in this manual, you should get the

most effi cient results from your machine. As a reminder, here are some steps to take to

ensure that you are using the dishmachine the way it was designed to work:

1. Ensure that the water temperatures match those listed on the machine data plate.

2. Ensure that all strainers are in place before operating the machine.

3. Ensure that all wash and/or rinse arms are secure in the machine before operating.

4. Ensure that drains are closed/sealed before operating.

5. Remove as much soil from dishes by hand as possible before loading into racks.

6. Do not overfi ll racks.

7. Ensure that glasses are placed upside down in the rack.

8. Ensure that all chemicals being injected to machine have been verifi ed as being at the

correct concentrations.

9. Clean out the machine at the end of every workday as per the instructions in the manual.

10. Always contact a QUALIFIED SERVICE AGENCY whenever a serious problem

arises.

11. Follow all safety procedures, whether listed in this manual or put forth by local, state

or national codes/regulations.

Содержание TEMPSTAR























































































Результаты поиска

Содержание TEMPSTAR

Отзывы:

Похожие инструкции для TEMPSTAR

Бренды по названию

Популярные бренды

Jackson TEMPSTAR, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание TEMPSTAR

Отзывы:

Похожие инструкции для TEMPSTAR

Бренды по названию

Популярные бренды