17
may be hot water in the water tank.
•
Do not place the appliance on top or near any source of heat (hot
gas, or electric burner or heated oven) or on top or near surfaces
where it can get wet.
•
Do not leave the hot iron touching fabrics or very inflammable
surfaces.
•
Do not use the iron if it has been dropped or damaged in any way
and contact an authorized BENRUBI Service Center.
•
Do not use the iron if there are visible signs of damage or if the iron is
leaking and contact an authorised BENRUBI Service Centre.
•
If the iron is not operating normally, disconnect it from the power
supply and contact an authorized BENRUBI Service Center.
•
Check the cord periodically for possible damages.
•
Do not use the iron if the supply cord or the plug are damaged and
contact an authorised BENRUBI Service Centre.
•
Do not leave the power cord hanging over the edge of the table or
counter where it can be reached by children, or touching hot surfaces.
•
Do not leave the appliance unnecessarily plugged in. Disconnect the
plug from the mains when the appliance is not being used.
•
Never leave the power cable wrapped during use. Unwind it
completely.
•
Any repairs made by a non-authorized BENRUBI Service Center
CANCEL THE GUARANTEE.
•
Unplug the appliance from the mains supply:
- Before filling or emptying the water tank.
- Before cleaning or maintenance operations.
- Immediately after use.
- If you do not use it.
•
After ironing:
- Turn the steam knob to “0” position and the adjustable thermostat
to “min”.
- Place the steam iron on the upright position.
