IXIA IxWLAN, Руководство пользователя

Страница: 138 / 150

The Command Line Interface (CLI)
System Under Test Commands
5-10 IxWLAN User Guide, Release 6.20
5
Country: US [ 52 (5260) 4 23] [ 36 (5180) 4 17] [149 (5745) 5 30]
AP BSS 5.745 (149) 39 00:12:d9:c4:0a:90 s TKIP
Rates: *6, *9, *12, *18, *24, *36, *48, *54
Security: WPA/PSK/TKIP
AP BSS 5.785 (157) 51 00:0b:6b:30:05:65 CK D-1
* * This is the System Under Test * *
Rates: *6, 9, *12, 18, *24, 36, 48, 54
Security: RSN/PSK/AES/TKIP
Country: US [ 52 (5260) 4 23] [ 36 (5180) 4 17] [149 (5745) 5 30]
AP BSS 5.825 (165) 52 00:0b:6b:30:05:86 cb/ap1
Rates: *6, 9, *12, 18, *24, 36, 48, 54
Country: US [ 52 (5260) 4 23] [ 36 (5180) 4 17] [149 (5745) 5 30]
AP: 6, Ad-Hoc: 0, Total BSSs: 6
The get bsslist detail command shows detailed information regarding the rate
capabilities and needs, country code and channel capabilities, and security infor-
mation of each BSS. This information is presented as it is read from the BSS’s
Beacon or Probe Response, when present. Not all APs broadcast this detail infor-
mation. It is shown only when available.
The first line of each BSS detail line item shows the basic BSS information: type,
channel, RSSI, BSSID, and SSID. The * * This is the System Under Test * *
message displays after the basic BSS information line if the System Under Test is
specified and detected.
Rates : This line indicates the set of transmit rates supported in the BSS. Entries
marked by an asterisk (for example, *6, *24) indicate a member of the BSS’s
basic rate set.
Security : This line indicates all security information that can be determined pas-
sively through inspection of information found in the Beacon or Probe Response.
WEP indicates basic WEP encryption. WPA or RSN indicate higher security in
the form of advanced authentication and encryption algorithms. PSK indicates
Pre-Shared Key authentication. EAP indicates the use of a more robust EAP-
based authentication algorithm. TKIP and AES indicate the cipher algorithm in
use. A WPA or RSN BSS may support more than one authentication or cipher
suite.
Country : This line indicates information found in the Country information ele-
ment, when present. This includes the country code and the channel list. The
channel list is formatted in the form: [first channel, number of channels, maxi-
mum transmit power]. Example: [ 52 (5260) 4 23]. In this example, first chan-
nel=52, number of channels =4, maximum transmit power=23.
join
Joins with the System Under Test. It must be present in the current Basic Service
Set list. See
bsslist (get) on page 5-9.
join
Example:
[wport1]IxWLAN -> join
The join should take about 1 sec
[wport1]IxWLAN -> IxWLAN: wport1 Join: Checking BSS ... OK