IxWLAN User Guide, Release 6.20
4-41
The Web-Based User Interface
IxWLAN Side Bar
IxWLAN->Select
SUT
You can access the Select System Under Test dialog (
) in two ways:
1.
Click one of the wport-specific
Select SUT buttons in the System Under
Test status tool bar at the top of the main window. In this case, when the
Select System Under Test dialog opens, only the wport checkbox correspond-
ing to the checked button is selected.
2.
Click the
Select SUT(s)
button in the IxWLAN side bar. In this case, when
the Select System Under Test dialog opens, none of the three wport check-
boxes are selected.
Figure 4-49. Select System Under Test
•
Select one of the wport BSSID checkboxes (for example, wport1).
•
Click a BSSID in the list box.
•
Click the
Select
button next to the wport1 BSSID box. The selection is copied
into the wport1 BSSID box.
•
Click the
Set
button corresponding to the wport1 BSSID box.
•
Select the wport1 checkbox.
•
Click the
Join
button to join wport1 with the selected System Under Test.
NOTE
: Clicking
Join
implicitly performs a
Set
action first (if not done explicitly
by clicking the
Set
button).
Содержание IxWLAN
Страница 1: ...IxWLAN User Guide Release 6 20 Part No 913 0073 03 Rev A May 2007...
Страница 28: ...Installation Connecting to the Serial Port 2 4 IxWLAN User Guide Release 6 20 2...
Страница 36: ...First Setup Using the Serial Port 3 8 IxWLAN User Guide Release 6 20 3...
Страница 128: ...The Web Based User Interface Menus and Tool Bars 4 92 IxWLAN User Guide Release 6 20 4...
