IXIA IxWLAN, Руководство пользователя

Страница: 101 / 150

IxWLAN User Guide, Release 6.20 4-65
The Web-Based User Interface
Event Log Side Bar
Event Log-
>Configure Log
The Configure Log button in the Event Log side bar opens the Event Log Con-
figuration dialog, as shown in Figure 4-80 .
Figure 4-80. Configure Log
IxWLAN Address : Defines the IP address of IxWLAN where the log file resides.
Logging : Enables/disables event logging.
Logging to Console : Enables/disables event logging to the CLI console. When
Logging to Console is enabled (checked), event data is posted to the console con-
nected to IxWLAN's serial port (if available). The web-based user interface can-
not be used to enable logging to a telnet session.
Logging to File : Enables/disables event logging to a file in the IxWLAN flash
file system.
Clear Event Log on Reset : The checkbox enables/disables clearing the event log
when the scenario is reset.
Log Verbosity : The verbosity level sets thresholds for which events are to be
logged: at higher verbosity, more events are logged; at lower verbosity, fewer
events are logged. Select
Critical , Low , Medium , or High from the list box.
Modules Logged : Select one or more modules (system processes) from which
event messages of the selected level should be collected.
• Click OK to close this dialog and save the event log configuration.
• Select Cancel to close this dialog without saving event log configuration.