IXIA IxWLAN, Руководство пользователя

Страница: 78 / 150

The Web-Based User Interface
IxWLAN Side Bar
4-42 IxWLAN User Guide, Release 6.20
4
• Click the Rescan button to update the list of BSSIDs. The merged list of new
wport1 BSSIDs and old BSSIDs for wport2 and wport3 displays.
• The Select button adjacent to a wport adds the respective BSSID in the list
box to the edit box left of it.
• The Set button sets the wport adjacent to it to the BSSID left of it.
• Click the Exit button to close this dialog without making any further changes.
To change the wireless mode, select 11a , 11b , 11g , or All Modes (that is, all
valid wireless modes) from the drop-down list adjacent to the Rescan button.
This field is used to select a wireless mode for optional successive scanning. It
defaults to the current wireless mode configured for the unit.
If a scenario with virtual stations already exists and you have previously joined
with a system under test, the dialog shown in
Figure 4-50 opens when you select
a different BSSID in the Select System Under Test dialog.
Figure 4-50. Selecting Different BSSID in the Select SUT Dialog
• Click Yes to continue and join with a different System Under Test.
• Click No to return to the Select System Under Test dialog.
IxWLAN->Join
SUT(s)
When the Join SUT button is selected in the IxWLAN side bar, a confirmation
dialog opens.
NOTE : If no wport checkbox is selected, the Rescan and Join buttons are
dimmed, as shown in Figure 4-49 on page 4-41.
NOTE : The Exit button does not undo any set, join, and rescan operations that
have already taken place.
NOTE : The wireless mode for the unit is set in the IxWLAN Radio tab of the
Configure IxWLAN dialog.
NOTE : For the IxWLAN SED chassis, the Select System Under Test dialog
looks the same, except for wports 2 and 3, which are dimmed.