IXIA IxWLAN, Руководство пользователя

Страница: 18 / 150

Introduction
System Needs
1-10 IxWLAN User Guide, Release 6.20
1
System Needs
• A PC with an available serial port or 10/100 Ethernet port that can be used to
send commands to IxWLAN
• If the web-based user interface is used, the command PC must be equipped
with:
• Microsoft Windows 2000/XP
• Microsoft Internet Explorer Version 6.0 or higher
• Recommended Memory: 256 MB
• Recommended Virtual Memory: 300 MB
• Recommended Processor Speed: PIII 700 MHz.
• One of the following ActiveX objects: Msxml2.XMLHTTP or
Microsoft.XMLHTTP. If either of these objects is not found, an alert mes-
sage displays: “FATAL ERROR: Error creating ActiveX object
XMLHTTP”.
Hardware Characteristics
This subsection provides specific information about the ports, LEDs, connectors,
and antennas of the two available chassis, IxWLAN SED, and IxWLAN SED-
MR+.
Ports and
Connectors
Both chassis have an Ethernet connector, a serial connector, and a power connec-
tor.
• Ethernet Connectors:
The IxWLAN SED and IxWLAN SED-MR+ chassis have two Ethernet
ports, a 10/100 Gigbit port and a 10/100/1000 Gigbit port, as described in
Table 1-3 .
The Mgmt. Port (Management Port) is used for managing IxWLAN via the GUI,
Telnet, or SDK (running over Telnet) or for downloading the ixwlan.sys image.
All IxWLAN IP address commands ( get/set ipaddr, get/set ipmask, get/set
gateway ) apply only to the Management Port.
The Ext. Traffic Generator port (External Traffic Generator port) is used exclu-
sively for the attachment of traffic generators (IxChariot, IxLoad, and so on) and
has no associated IP stack/address.
Table 1-3. IxWLAN SED/SED-MR+ Ethernet Ports
Front Panel Label System DeviceName:unit Speed
Mgmt. Port fei:0 10/100
Ext. Traffic Generator gei:0 10/100/1000