
Chapter 7 SCSI Software Installation
82
WA133 Series
Chapter 7
SCSI Software Installation
This chapter will guide you through installation of the appropriate IWILL driver for each of
operating systems supported. The chapter also provides instructions for creating the installation
diskettes, which contain the Universal Drivers from Power Installer CD.
You boot from your CD-ROM drive and create the installation diskettes for your specific OS
environment (without going through any operating system). Follow the steps outlined below to
create the diskettes you need. You need just one 1.44 MB diskette for each OS listed.
7.1 SCSI Software Installation on DOS
Insert the Power Insatller CD into your CD-ROM drive and restart your PC. The BIOS will look
for a bootable CD in the CD-ROM drives attached to your system. For example, you use
SCSI CD-ROM. When it detects the Power Installer CD, you will see the following message:
Bootable CD detected in SCSI CD-ROM Drive with ID #5:
0 - Default Entry [Bootable 1.44 MB Floppy
Select image number or press Escape for normal boot:
Step1:
Enter the image number for the Power Installer CD from the list of bootable CDs
displayed on the screen (or press the Esc key to boot from your hard disk). The following Iwill
Bootable CD Diskette Creator 1.0 menu will appear on the screen:
www.iwill.net
Iwill Bootable CD Diskette Creator 1.0
Driver diskettes you can create by typing a number below:
1)Make BS100/DBS100/DBL100/DGL200 SCSI Device Driver
2)Make WA133-S/WA133-SN SCSI Device Driver
3)Make DS133R/DCA200 Lan Driver
4)Make W100-N Lan Driver
5)Make WS133-N/WA133-N/WA133-SN Lan Driver
Commands you can run by typing a letter below:
A) Toggle floppy drive between A: and B: (Must be 1.44 MB)
B) Exit the Diskette Creator
Type a driver diskette number or command letter followed by <Enter>:
Step2:
Type in 2), and press Enter to continue. The message appears on the screen.
WA133-S / WA133-SN SCSI Device Driver
1) SCSI driver for WIN95 / 98
6) SCSI driver for OS / 2
2) SCSI driver for DOS / WIN 3.1
7) SCSI driver for SCO Unix