
Chapter 5 BIOS Setup
74
WA133 Series
When you press <Enter> on this item you get a confirmation dialog box with a message similar to:
Pressing ‘Y’ loads the default values that are factory settings for optimal performance system
operations.
5.13 Set Supervisor / User Password Setting
These setup pages are used for password setting. When a password has been enabled and the
Security Option field is set as Setup, you will be required to enter the password every time you
try to enter BIOS Setup program. This prevents an unauthorized person from changing any
part of your system configuration. Additionally, if the Security Option field is set as Boot,
the BIOS will request a password every time your system boot. This would prevent unauthor-
ized use of your computer.
In you wish to use this function, bring the cursor to this field, then press <Enter>. The computer
will display the message, “Enter Password”. Type your password and press <Enter>. After the
message onfirm Password” is displayed, re-type your password. The Supervisor Password function
will be in effect after you save and exit setup.
To disable a password, bring the cursor to this field, then press <Enter>. The computer will display
the message, “Enter Password”. Press <Enter>. A message will confirm that the password is
disabled. Once the password is disabled, the system will boot and you can enter setup program freely.
The User Password allows you to enter BIOS setup program, but yo
cannot change the value of any fields Please keep your password in safe
place.
5.14 Save & Exit Setup
Saves current CMOS value and exit BIOS setup program.
5.15 Exit Without Saving
Abandons all CMOS value changes and exits BIOS setup program.