IWILL wa133 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 87

IWILL wa133 Скачать руководство пользователя страница 44

Chapter 4 Hardware Setup

44

WA133 Series

4.7.8 Front Panel Connector (J43)

This connector is composed of all the headers that may be connected to the front panel of the chassis.

Power/Soft-Off Connector (PWR_ON)

The system power is controlled by a momentary button connected to this connector. Pressing the
button once will switch the system between ON and OFF. Pushing the button for more than 4 seconds
will turn the system off.

ACPI LED Connector (ACPI)

This 2-pins connector is for a ACPI power status indicator. The LED status will depend on the connector.

IDE LED Connector (ALED)

This 2-pin connector connects to the case-mounted IDE LED, which lights when the IDE devices
connected to the primary / secondary IDE connectors are working.

Reset Connector (RST)

This 2-pin connector connects to the case-mounted reset button for rebooting your computer without
having to turn off the power supply.

«
...
42
43
44
45
46
...
»

Содержание wa133
























































































Отзывы:

Нет отзывов