manualshive.com logo in svg

IWILL wa133, Руководство пользователя, Страница: 69 / 87

Поделиться
Скачать
IWILL wa133 Скачать руководство пользователя страница 69

Chapter 5  BIOS Setup

69

WA133 Series

If enabled, timer restarts whenever the slave disk of the secondary IDE channel is active.
Options

Enabled
Disabled (*)

5.7.14.5 FDD, COM, LPT Port

If enabled, timer restarts whenever the floppy disk serial device/parallel device is active.
Options

Enabled
Disabled (*)

5.7.14.6 PCI IRQ#

If enabled, timer restarts whenever any of the interrupts occurs.
Options

Enabled
Disabled (*)

5.8 PnP/ PCI Configurations

5.8.1 PNP OS Installed

The field specifies whether a Plug and Play operating system is installed.

Options

Ye s
No (*)

5.8.2 Reset Configuration Data

Normally, you leave this field Disabled.  Select Enabled to reset Extended System Configuration
Data (ESCD) if you have installed a new add-on and the system reconfiguration has caused such
a serious conflict that the operating system can not boot.

Options

Enabled
Disabled (*)

5.8.3 Resources Controlled By

Содержание wa133
























































































Отзывы:

Нет отзывов