
Chapter 5 BIOS Setup
51
WA133 Series
Chapter 5
BIOS Setup
5.1 Introduction
The motherboard uses AWARD BIOS, which is stored in flash memory and can be upgraded using the
appropriate software program. The setup program is for viewing and changing the BIOS setting for a
computer. These settings are stored in battery-backed RAM so that it retains all the settings after the
power has been turned off.
5.1.1 Upgrade BIOS
The BIOS can be upgraded from a diskette with the Award Flash utility — AWDFLASH.EXE. The BIOS
image file, and update utility are available from IWILL’s WEB site: www.iwill.net
5.1.2 Enter BIOS setup program
Power-on the system by either pressing the Power-On button, or by using any of the power-on features
provided by the motherboard. Then, press the <Del> key after the Power-On Self Test (POST), and
before the scanning of IDE devices. Simply look for the message “Press DEL to enter SETUP” displayed
at the bottom of the screen during the boot up process. If the message disappears before you’ve had
a chance to respond, you can restart the system by
Turning off the system power then turn it on again, or
Pressing the “RESET” button on the system case, or
Pressing <Ctrl>, <Alt> and <Del> keys simultaneously.
5.1.3 Using BIOS setup program
The following table shows the function keys available for each menu screen.
á
Up
Move to the previous field
â
Down
Move to the next field
ß
Left
Move to the field on the left hand side
à
Right
Move to the field on the right hand side
<Esc>
Quit from setup program without saving changes, or
Exit from current menu page and return to main menu page
<PgUp> or <+>
Select the previous value for a field
<PgDn> or <->
Select the next value for a field
<F1> General
Help
<F2> Item
Help
<F5> Previous
Values
<F6> Fail-Safe
Defaults
<F7> Optimized
Defaults
<F10>
Save the current value and exit setup program