13
the JP18(front pa nel power on/off switch) is necessory to be
connected.
Step 15. Install the Keyboard
Follow the keyboard cable’s key direction and connect to this
motherboa rd.
Step 16. Install the Display Card
Fina lly, follow the displa y ca rd you ha ve a nd insert in
horizonta l direction into the PCI/ISA expa nsion slot.
Step 17. Power on the system
Once the system wa s power on, on the lower left corner of the
screen will show ”Press DEL to enter SETUP, ESC to skip
memory test”. Then press “DEL” to enter BIOS setup for the
first time power on and choose the “LOAD SETUP
DEFAULTS” then BIOS will responds “Load SETUP
default(Y/N)?”, press “Y” and “Enter”. Final choose “SAVE to
CMOS and EXIT (Y/N)?” by pressing “Y” and “Enter”.
Step 18. Enjoy this power SCSI Motherboard
After these steps of insta lla tion, the system should prepa red
a nd ca n run most softwa re. And you ca n follow the Opera tion
System a nd Applica tion softwa re insta ll procedule to run.
Reference to the following Cha pter for a ny un-norma l on this
system or more informa tion.
