REL1.0
Page 99 of 106
RZ/G1H Qseven Development Platform Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
4.3.2
RZ/G1H Camera Add-On Module Mechanical Dimensions
The RZ/G1H Camera Add-On Module PCB form factor is 94mm x 60mm as shown below.
Figure 41: RZ/G1H Camera Add-On Module Mechanical dimension
–
Bottom View
4.3.3
Guidelines to insert the Qseven SOM into Carrier Board
Make sure that power is not provided to the carrier board.
Insert the Qseven module in to the MXM connector at an angle of 30° as shown below in the first photo.
Check the Notch position of Qseven module is proper while inserting.
Once the Qseven module is inserted to the MXM connector properly, press the board vertically down as shown
below (in the second photo), such that the board is fixed firmly into the expansion connectors.
Figure 42: Qseven SOM Insertion procedure
