REL1.0
Page 103 of 106
RZ/G1H Qseven Development Platform Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
3.
Insert the Camera Add-On Module into the RZ/G1H Qseven carrier board through the M2.5mm screw as
shown below. Press and make sure all three mating connector of Camera Add-On Module is inserted properly
into the carrier board Expansion connectors.
Figure 45: Insert Camera Add-On Module
4.
Insert the 2.5mm Non-metallic flat washer into the screw as shown below.
Figure 46: Insert Non-Metallic Flat Washer
