Iwatsu SY-956, Инструкция по эксплуатации

Страница: 38 / 44

28
■
4.16 Switching graphs
● Similar to the normally installed testing modes, the displayed graph can be switched to a B-H graph or a
time axis graph. Please refer to the B-
H Analyzer’s instruction manual for the operation.
■
4.17 Cursor measurement
● Similar to the normally installed testing modes, cursor measurement is possible. Please refer to the B-H
Analyzer’s instruction manual for the operation.
■
4.18 Scaling up/down of graph
● Similar to the normally installed testing modes, scaling up/down of graphs is possible. Please refer to the
B-
H Analyzer’s instruction manual for the operation.
■
4.19 Reference function
● Similar to the normally installed testing modes, a measurement result can be stored, using the reference
function. Please refer to the B-
H Analyzer’s instruction manual for the operation.
■
4.20 USB memory output of screen hardcopy
● Similar to the normally installed testing modes, output of a measuring screen hardcopy to a USB memory is
possible. Please refer to the B-
H Analyzer’s instruction manual for the operation.
■
4.21 Save/Read data
● Similar to the normally installed testing modes, saving measuring data and such into a USB memory is
possible. Reading the measuring data from a USB memory is also possible. Please refer to the B-H
Analyzer’s instruction manual for the operation.
* When saving Yoke Comp. enabled measuring data, both a measuring data file (extension .mes) and a
hidden progress file with the same file name (extension .prg) are saved in the USB memory . Please note
that this progress file saves the testing progress until the end of the 3rd measurement. In case a failure is
suspected,
it is likely to ask for submitting , and cooperate.