Iwatsu SY-956, Инструкция по эксплуатации

Страница: 26 / 44

16
■
4.3 Connecting Mini Single Sheet Tester Cable SY-957
● The following shows how to connect the provided Mini Single Sheet Tester Cable SY-957.
(1) Make sure the B-H Analyzer is turned OFF .
(2) Remove the measuring terminal block from the
POD.
Unscrew 2 thumbscrews on the terminal block first.
(See Fig. 4-3)
(3) Then, hold the knobs with both hands and pull up
perpendicularly. (See Fig. 4-4)
* Store the M3 screws so that they do not get lost.
(4) Install the measuring block for Mini Single Sheet
Tester Cable SY-957.
First, align the terminal block guide with the
measuring POD guide. (See Fig. 4-5, 4-6)
Then
slowly push down the terminal block
perpendicularly along the guide. (See Fig. 4-6)
Terminal block guide
POD guide
(4) Align guides and
slowly push down
Fig. 4-5 POD guide
Fig. 4-3 Removing the measuring terminal block
Fig. 4-4 Removing the measuring terminal block
POD guide
Fig. 4-6 Inserting the SY-957 terminal block
(2) Unscrew thumbscrews on the
terminal block
(3) Hold the knobs and pull
up perpendicularly.