Ivoclar Vivadent Programat EP 5000 G2, Руководство по эксплуатации

Страница: 24 / 44

24
5.6 Description of the symbols in the display 5.7 Explanation of the speaker signals
Basically, all the acoustic signals are played in the melody and at the
volume selected by the user.
The signal transmitter can only be ended with the STOP key.
1 After the self-test is completed
To inform the user that the automatic self-test has been
successfully completed, the selected melody is played.
2 Furnace head open and temperature below 550 °C / 1022 °F
To inform the user that the temperature in the open furnace head
has dropped below 550 °C / 1022 °F, the selected melody is
played (5 seconds). In other words, the furnace head is basically
cool enough for the next program start.
3 Furnace head open and temperature below 320 °C / 608 °F
To inform the user that the temperature in the open furnace head
has dropped below 320 °C / 608 °F, the selected melody is
played.
If the first playback (10 seconds) is not acknowledged with the
STOP key, a second playback sounds after 5 minutes (for
5 minutes). After that, no further signal is played.
If one of the two playbacks is acknowledged with the STOP key,
the signal transmitter is switched off immediately and no further
signals indicating the cooled furnace head will be sounded.
4 For error messages
Error messages are acoustically supported with the ‚error melody‘
(endless beep). The signal transmitter may be switched off with
the STOP key, while the error message still remains visible. If the
error message is acknowledge with the ESC key, the signal
transmitter is also switched off.
Symbol Name Meaning Symbol
Pre-vacuum Vacuum generation starts
before the heating begins
„One-stage
program“
Abstract firing curve of a
one-stage program
”Two-stage
program”
Abstract firing curve of a
two-stage program
”Standard opening of
the furnace head“
Furnace head opens in
the standard period of
time
”Quick opening of
the furnace head“
Furnace head opens in a
short period of time, i.e.
quicker (arrow)
Cooling Shock
Protection
Cooling Shock Protection
is selected or active
Crossed-out Cooling
Shock Protection
Cooling Shock Protection
is inactive
„Thermo Shock
Protection“
Thermo Shock Protection
active
Crossed-out
Thermo Shock
Protection
Thermo Shock Protection
inactive
Open lock ”Individual write-
protection inactive“
Closed lock ”Individual write-
protection active“
Crossed-out
„crescent moon“
”Overnight program
inactive“
”Crescent moon” Overnight program func-
tion only active for the
next program sequence
Half open furnace
head with heat rays
Pre-drying with half open
furnace head active
”Individual group
write-protection
active”
All 10 programs of this
group are write-protected
”General write-
protection active”
All programs are
write-protected
Press mode or note
on the active press
procedure
If the operating mode
“pressing” is selected,
the following symbol is
shown in the program
overview/selection in the
upper part of the display.
If the press process has
been started, this symbol
is shown next to the
remaining pressing time.
Firing mode If the operating mode
“firing” is selected, the
following symbol is
shown in the program
overview/selection in the
upper part of the display.