31
10. Appendix
10.1
Program table
The program tables (°C / °F) are enclosed in the Operating
Instructions. Should this not be the case, please contact the Ivoclar
Vivadent Service Center.
Important Information
You also will find the program tables in the Internet:
www.ivoclarvivadent.com/downloadcenter
You can download the program tables as PDF files from this side.
Please note, that the version of the program tables should
correspond to the Software version which is used on your furnace.
10.2
Program structure
Program
Description
1
Crystallization/glaze program for IPS e.max CAD HT/LT
2
Corrective firing for IPS e.max CAD
3
Speed Crystallization/glaze program for
IPS e.max CAD HT/LT
4
Stain and glaze program for IPS Empress CAD
5
Fusion/Crystallization program for the IPS e.max CAD-
on technique
6
Characterization/glaze program for the IPS e.max CAD-
on technique
7
Crystallization program for IPS e.max CAD Impulse
8 to 20
Individual Programs
Please observe the notes in the Instructions for Use of the
corresponding material.
