Iveco NEW DAILY, Инструкция по эксплуатации

Страница: 132 / 240

12
NEW DAILY
–
POWER TAKE-OFFS
POWER TAKE-OFFS
4.5
PTO MANAGEMENT
–
Printed 603.95.789
–
1 Ed. - Base 02/2014
166054
Figure 6
1. Relay for PTO with Expansion Module
Table 4.2
SCM1/C
Type
Power Supply
Protection
Presence
Capacity
[A]
Type
STD OPT
T61 Expansion Module X 20
T62 Expansion Module X 20
T63 FF X 20
T64 FF X 20
T65 FF X 20
T66 available X 20
–
F79 30 T61 relay (30-87) for PTO from Expansion Module X 15 A0
F80 30 T62 relay (30-87) for PTO from Expansion Module X 15 A0
–
Note The "after market" installation of a PTO means, once installation is complete, referring to IVECO Customer Service to update the
ECU software though the teleservice.
PTO Mode
Given the distinction between PTOs for manual or automatic transmission, up to two homogenous PTOs can be installed on the
vehicle. For instructions on how to insert and remove the PTO, refer to the Use and Maintenance Manual.
The operation of the engine and transmission depend on their respective control units and, in the case of automated gearbox and
activated PTO, operation of the Expansion Module can be communicated with the control units.
The behaviour of the gearbox can be affected therefore when the PTO is configured as “
stationary ” or “ not stationary ”: in
the first case the gearbox remains in neutral, in the second case it allows engagement of the first gear or the reverse gear.
▶
For safety reasons, when the non-stationary PTO is engaged, gear changes are not possible (in-
volving the automatic switch-off) and the vehicle should not exceed a speed of 20 km/h.