Iveco NEW DAILY, Инструкция по эксплуатации

Страница: 109 / 240

NEW DAILY
–
APPLICATIONS OF SUPERSTRUCTURES
APPLICATIONS OF SUPERSTRUCTURES
3.7 INSTALLATION OF TANKS AND LOOSE MATERIAL CONTAINERS
23
–
Printed 603.95.789
–
1 Ed. - Base 02/2014
193895a
Figure 18
As previously mentioned, the stiff connections positioned in correspondence with the rear suspension mounts are more suitable
for transmitting forces directly to the suspension elements; elastic connections are to be arranged near the front suspension rear
mount.
If this is not carried out, use suitably oversized longitudinal reinforcement sections with respect to those shown in Table 3.7.
When defining elastic connections, consider the rigidity of the chassis in the area where the connections are to be applied and the
type of functions for which the vehicle is intended.
b) Installation without a counter chassis
The application of tanks directly on the chassis is possible under the following conditions:
●
the distance between the various rests must be established according to the load to be transmitted (approximately no more
than 800 m);
●
the rests must be made to uniformly distribute the load on a suitably wide surface (see Figure 18) and with bracing to contain
longitudinal and transverse forces;
●
anchoring must be sufficiently extended in width (approximately 400 mm
–
see Figure 19) and arranged near suspension
mounts.
Specifically, the front anchoring flexibility must be suited to contain the necessary torsional movements of the chassis;
●
other anchoring solutions must be authorised by IVECO.
208921
Figure 19