Iveco DAILY M.Y. 2012, Инструкция для тренажера

Страница: 148 / 252

4-10
POWER TAKE OFFS D
AILY
Base - 02/2012 Printed 603.95.241
PTO management
PTO management
4.6 PTO management
4.6.1 General specifications
The vehicle may be equipped with the following alternative original equipment options:
a) only PTO (opt. 75076/75077/75078);
b) PTO (opt. 75076/75077/75078) and Expansion Module (opt. 8657);
c) only Expansion Module (opt. 8657);
where the Expansion Module is an electronic interface designed to manage certain types of conversion (additional lights, alarms,
after-market PTOs, etc).
See the specifications in IVECO Guideline no. 603.95.231 of 12/2010 for description of the characteristics and methods of use.
In case (a) where only the PTO is present, a control panel is installed on the instrument cluster (Figure 4.6, page 4-11), which consists
of:
•
PTO section , which provides management of the engagement and disengagement of the Power Take Off using a pushbutton
(1) with a warning light (2) signalling the situation in progress;
•
VALVE section , for managing the operation of a dump body (if present) and interaction with the hydraulic distributor fitted
on the lifting system. For vehicles without a tipping body, the VALVE section is not operational.
For operation of the tipping body, see instructions on page 4-11.
In case (b) , in addition to the panel for the PTO, a special button (6, Figure 4.6, page 4-11) for operation of the Expansion Module
is located in the centre of the dashboard.
In case (c) the Bodybuilder is left free to decide where to position the PTO controls.