14
IQ Power™ BPS
5201197 Rev. D
E. The perforated strip may be installed on the mounting bracket at right angle to the
bar or parallel to the bar. The perforated strip may be bent or twisted to suit the
application and will hold its shape as installed.
F. Once the static bar is loosely installed, tighten all hardware.
G. Install (2) set screws into the holes in the side of the mounting bracket using the
provided hex key wrench. The set screws engage the “T” on the base of the bar
securing it in place.
See Static Bar Bracket diagram.
Mounting the Power Supply
A. Locate power supply at a convenient place within reach of the static bar high voltage
cable and visible to the machine operator. Power for the AC adapter and an electrical
ground connection must be available.
B. Secure power supply to the mounting surface (commonly a machine frame) using M5
or M4 [#10 or #8] hardware (not supplied).
C. Locate AC adapter at a convenient place within reach of the power supply.
D. Install AC Adapter by cleaning back of adapter and mounting surface with alcohol.
Allow alcohol to dry. Secure AC adapter to mounting surface with two self-adhesive
mounting pads.
NOTE -
Do not apply line voltage to the AC adapter until installation is complete.
Also ensure that all input power switches are in the OFF (0) position.
Mounting the Communication Module (optional)
A. Locate communication module at a convenient place within reasonably close distance
to the computer. Use the modular cable (black) supplied with unit to connect the
Communication Module to the IQ Power™ BPS is 2.13 meters [7 feet] long, however
longer cables (not supplied) are available. Cables for the communication module
must be 8-conductor modular cables with RJ-45 connectors wired “crossover”
(reference color: black, Figure 5a).
B. Secure communication module to the mounting surface (commonly a machine frame)
using M5 or M4 [#10 or #8] hardware (not supplied).
C. Install AC Adapter by cleaning back of adapter and mounting surface with alcohol.
Allow alcohol to dry. Secure AC adapter to mounting surface with two self-adhesive
mounting pads.
Electrical Connections
A.
Ground power supply
by connecting ground lead between ground terminal on
flange of the power supply and a good electrical machine ground.
