2
5200860 Rev H
Ion-O-Vac
2. Failure to properly ground the power supply may result in an electrical shock
hazard to personnel and inefficient operation of the equipment. Do not apply
line power until all grounds and high voltage connections have been completed.
3. Do not pour alcohol on bar or soak bar in alcohol at any time or damage to the
inner bar assembly may result.
4. Do not hang rags on static bar or a fire may result
5. To avoid a potential fire hazard caused by sparks in the dust collector, do not
mix combustible materials such as buffing lint, paper, wood, dust, aluminum
and magnesium with dust generated from grinding ferrous metals.
6. Under no condition should machine operator put a lit cigarette or any burning
object into the hood or ducting of the dust control system.
7. When collectors are used to collect dust at risk of fire or explosion, the dust
collector should be located outside the building. An individual familiar with
fire extinguishing equipment, flammable material hazards and local fire codes
should be consulted for installation of the collector and installation of proper
fire extinguishing equipment.
8. Explosion relief vents are required on some applications. Consult with
an insurance underwriter or a NFPA MANUAL (NFPA 68 Venting Of
Deflagrations – NFPA 91 Blower and Exhaust Systems) to determine proper
vent size and ratio. Vents installed on dust control equipment within a
building must be vented to the outside with ducting that meets the following
specifications:
• Cross sections are no smaller than the vent
• No longer than 10’
• Straight with minimal bends (to minimize chances of secondary explosion)
• Fabricated from 16 gauge (or thicker) sheet steel
9. Consult the proper authorities to determine proper venting methods. Simco-
Ion’s dust collectors do not contain explosion relief-vents.
10. Consult and comply with all National and Local Fire Codes and/or other
appropriate codes when determining the location and operation of dust
collection equipment.
Содержание Simco-Ion Ion-O-Vac
