DANGER!
Risk of injury due to running pump!
–
Do not touch the pump when it is running.
–
Do not work on the pump when it is running.
–
Prior to all assembly and maintenance work, switch off the
motor and safeguard against being switched on again.
–
Prior to all assembly and maintenance work safeguard the
pump against pressure charging.
DANGER!
Mortal danger due to moving machinery!
–
Ensure that the coupling guards are mounted on completion of
work on the pump.
WARNING!
Risk of injury and poisoning due to hazardous or hot pumped
media!
–
Use personal protective equipment during all work on the pump.
–
Allow the pump to cool prior to work, if possible.
–
Ensure that the pump is pressure-free.
–
Empty the pump, flush if necessary and safely contain pumped
media and dispose of in an environmentally friendly manner.
–
When working on the system always monitor for gas leaks
using an appropriate gas detection device (fixed installation or
mobile gas detection device).
–
Do not work on the system alone or without regularly reporting
back.
–
For applications with natural radioactivity:
–
Wear breathing protection, avoid inhaling dust and absorp-
tion of solids.
–
Decontaminate or dispose of clothing after work.
Mechanical seals have a function-related leak (
manufacturer's
instructions).
Mechanical seals are subject to natural wear, which largely depends
on the respective conditions of use. It is therefore not possible to
provide general information regarding the service life.
Maintenance intervals are shorter with more severe operating condi-
tions (e.g. frequent switching on/off, high temperatures, low vis-
cosity, aggressive environmental and process conditions).
n
Before opening the pump or system components, always ensure that the
pump has been taken out of operation properly (
Please note:
Maintenance and repairs
Type SLH-4G, SLHS-4G
62
01/2016 JPB Rev. 5
