n
The pumping of acids and other corrosive liquids without approval of ITT
Bornemann GmbH,
n
The pumping of pure gases,
n
The operation of pipelines without approval of ITT Bornemann GmbH,
n
Operation without the required safety redundancies,
n
Throttling of the outlet side,
n
Filling of the pump whilst hot,
n
Filling during ongoing operation,
n
Spraying with high-pressure jets or fire extinguishing equipment,
n
Operation with the safety devices removed,
n
Failure to undertake measurements and checks for early damage detection,
n
Failure to observe the maintenance intervals,
n
Impermissible exchange of wearing parts,
n
Incorrectly executed maintenance or repair work,
n
Reversal of the permissible pumping direction,
n
Inappropriate use, also of auxiliary systems.
2.3 Risk assessment
Residual risks that cannot be avoided by design throughout the entire service life
of the pump system may include:
n
Risk of death,
n
Danger of injury,
n
Environmental hazards,
n
Material damage to the pump,
n
Material damage to further property,
n
Restrictions to performance or functionality.
You can avoid existing residual risks through the practical implementation and
observation of these specifications:
n
The specific warning information pertaining to the pump,
n
The general safety information contained within this manual,
n
As well as the specific warning information contained within this manual.
The pump may pose risks to the life of personnel due to:
n
Erroneous use,
n
Unprofessional handling,
n
Missing safety equipment,
n
Defective or damaged parts,
n
Operating medium vapours,
n
Operating medium gases.
The pump may pose a risk of injury to personnel due to:
n
Unprofessional handling,
n
Transportation,
n
Hot parts,
n
Contact with bare hands.
Safety
Type SLH-4G, SLHS-4G
11
01/2016 JPB Rev. 5
