Original notice - A1.20
F-RAT-NX75 Technical document
8
WARNING
CAUTION
Do not use the product near places subject to explosive,
flammable gas, and/or corrosive atmosphere, and/or
combustible materials.
Failure to follow this could result in explosion, fire, electric shock and/or
injury.
When using the product in places where serious accidents
and/or damage may possibly occur, install backup and/or
fail-safe functions systematically.
Failure to follow this could result in the inability to control this product due
to driver card malfunction, which could lead to serious accidents.
Do not apply heavy loads to this product, such as stepping on it.
Failure to follow this could result in people falling and/or malfunction.
Do not forcibly bend and/or pull cables.
Also, do not put heavy materials on cables, or do not get them
stuck between cables.
Failure to follow this could result in fire and/or electric shock due to cable
damage.
Make sure to attach ground wires to this product and the DC
power supply unit.
Failure to follow this could result in electric shock if any malfunction or leakage
occurs.
Never remodel the product and/or driver cards.
Failure to follow this could result in serious accidents.
Do not touch the product when it has just stopped operation.
Failure to follow this could result in burns.
Do not put water and/or oil on the product, and do not transfer
wet and/or oily trays.
Failure to follow this could result in electric shock, and/or malfunction.
Do not come into contact with the moving parts, such as the
carrier wheels, rollers, or lifting sections, and/or allow clothes to
get close to them.
Failure to follow this could result in them getting caught and/or stuck.
3-1.
General precautions
Do not apply strong impact and/or excessive force to the
product, such as hitting it with objects, or dropping it. Also, do
not use the equipment if strong impact has been applied, and/or
if the appearance has become deformed.
Failure to follow this could result in malfunction due to applied impact.
General precautions
3.
Safety precautions
Safety precautions
Advance preparation
Product check
Structures
Installation/Wiring
Control/Operation
Maintenance/Inspection
Tr
oubleshooting
Appendix
The side and lower parts of the module are not protected against
mechanical hazards. Protection complying with local safety
standards must be provided.
