Original notice - A1.20
F-RAT-NX75 Technical document
1.
Introduction
3
This product is designed as a general industrial device. Do not use for other applications. We
do not take any responsibility for any damage that may result from the disregarding of these
warnings.
Also, in the event that an accident results from the use of this product, we do not compensate
for any damage, including abnormalities of equipment, connection devices, and/or software,
any damage resulting from malfunctions, and/or any other secondary damage.
There are some examples of parts that need to be prepared by customers, as explained
within this manual. However, this does not provide any guarantee against the existence of
any rights, such as our industrial property rights, or those of other companies, in advance.
Notes on industrial
property rights
We respond to technical inquiries based on the contents described within this manual, and
on this product within the range of general items for this product unit with standard
specifications, and for the options prepared by us.
There are some descriptions in this manual, about parts, equipment, and wiring arranged
by customers, as well as the controls and operation under such circumstances. However,
these are not included in the guaranteed operating range and/or support.
When in use, please check and perform the aforementioned based on your responsibility
according to operation.
Notes on technical
support
This product is intended to comply with the risk category 2
*2
or lower as defined in NF
EN13849-1
*1
. Its an incomplete machine and it have to be integrated on the complete
machine to have CE certification. Nevertheless the module respect the point : 1.1.2 / 1.1.3/
1.1.4/ 1.1.5/ 1.3.2/ 1.3.4/ 1.3.8.1/ 1.3.8.2/ 1.4.1/ 1.4.2.1/ 1.5.1/ 1.6.1/ 1.7.1/ 1.7.3/ 1.7.4/
1.7.4.1/ 1.7.4.2 of the European machinery safety standard. It does not comply with
purposes beyond risk category 3 or higher.
*1: European machinery safety standards
*2: This indicates that even though events that would result in serious injury occur infrequently under assumed risk
environment, there is a high probability to avoid danger if you observe the safety contents described in this
manual.
About the risk category
of this system
This product is not equipped with special dust proof/waterproof countermeasures, and is
intended to be used in environments of “Pollution Degree 2”, as defined in IEC60664-1.
For this reasons, if users install this product in an environment that requires dust
proof/waterproof treatments, they need to add necessary countermeasures, and check the
performance based on their responsibility.
About installation
environment
・
In this manual, F-RAT-NX75 is described as F-RAT, and F-RAT-NX75 and F-RAT
are described separately, when needed.
・
Depending on the signal type (NPN/PNP) specified by customers, different models
of control driver cards are supplied as being the standard for this product.
About description of
the product
Disclaimer
Signal input/output type
Included driver card model
NPN
CBK-109FN
（
1
）
CB-016BN7
（
1
）
HBM-201BN
（
1
）
PNP
CBK-109FP
（
1
）
CB-016BP7
（
1
）
HBM-201BP
（
1
）
In this manual, CBK-109FN and CBK-109FP are described as CBK-109, CB-016BN7 and
CB-016BP7 as CB-016, and HBM-201BN and HBK-201BP as HBM-201.
Also, CBK-109FN and CBK-109FP, CB-016BN7 and CB-016BP7, as well as HBM-201BN
and HBM-201BP are described separately, when needed.
Disclaimer
Signal input/output type
Included driver card model
NPN
IB-E04F-N-FT
（
1
）
HBM-201BN
（
1
）
IB-P02F-P-FT
(or IB-E04F-P-FT)
（
1
）
HBM-201BP
（
1
）
PNP
In this manual, IB-E04F-N-FT and IB-E04F-P-FT are described as IB-E04F-FT, and
HBM-201BN and HBM-201BP as HBM-201. Also, IB-E04F-N-FT and IB-P02F-P-FT (or
IB-E04F-P-FT), as well as HBM-201BN and HBM-201BP are described separately, when
needed.
