6
F-RAT-S300
U
ser
manUal
Original notice - U1.2
6. e
lectrical
installation
and
Wiring
• The electrical installation and wiring must be carried out in accordance with good engineering practices and in conformity
with existing local standards.
• All electrical procedures must be carried out by authorized individuals and the safety-locking procedure of an electrical
installation must be complied with.
• A TBTS 24 VDC stabilized power supply with a capacity matching the module must be provided for proper operation
(only one motor operates at a time).
• Ensure good electrical continuity between the module and the conveyor frame, which is itself grounded.
c
ontrol
With
Pm500fe
motorized
roller
and
cbm-105-fP1-eU1
circUit
board
• Install the control panels with the two M4 screws
provided.
• Connect the motor cables to the control panel and
then the input/output signal cables as well as the
cables connecting the sensors to the PLC. Be careful
to connect the sensor polarities correctly. It may be
damaged if the polarities are reversed.
All manuals and user guides at all-guides.com
all-guides.com
