5
F-RAT-S300
Original notice - U1.2
U
ser
manUal
5. m
echanical
installation
• The vibration level for the location must be ≤ 0.5 G.
• The side and lower parts of the module are not protected against mechanical
hazards. Protection complying with local safety standards must be provided.
• Secure the module to the module brackets using four M8 screws (not supplied).
• Make sure that the cables are not pinched or damaged.
• Make sure that the identification and safety labels remain visible.
• The transfer module must be installed horizontally. It must not be bent, clamped or tilted. An improperly installed
module can inhibit the vertical movement (raising/lowering) or cause incorrect detection of the proximity sensor.
• Once the transfer module is properly installed, conveyor level upstream and downstream of the module must be set.
s
ettings
m
oUnting
Mounting example
10
145.
6
157.
6
745
40
40
170
2×4-M8
4- 8.4
Trou de montage de l’étai
*
*
Distance between the conveyance level and the module’s support bracket
*
1 M8 retaining screw not supplied
*
2 Optional
*
1
18.6
Module support
*
2
Mounting bracket
(Support mounting hole)
F-RAT-S Mounting hole
All manuals and user guides at all-guides.com
