3
Application
Four-row linear guide system (with full complement) on a profiled steel rail.
The individual Bearing Carriages can be loaded from all directions and can
absorb moments around all axes. The key features of linear guide system PS
4-25 include high load-carrying capacity and rigidity and a compact design.
Any Bearing Carriage PS 4-25 can be freely combined with any Linear Guide
Rail PS 4-25, so that one or more carriages can be mounted on one rail and
carriages can be exchanged.
The linear guide system is pre-tensioned as standard.
Linear guide system PS 4-25 comprises the following components:
Linear Guide Rail PS 4-25 (a)
Fastening screws DIN 6912 M6x40 (b)
Guide Rail Mounting Profile PS 4-25 (c)
Guide Rail Clamping Profile PS 4-25 (d)
Line 8 profile (e)
And Bearing Carriage PS 4-25:
The driven linear unit is a product in accordance with the Machinery Directive
2006/42/EC (partly completed machinery). The driven linear unit can only be
used in accordance with the technical data and safety regulations of the pres-
ent documentation. The internal rules and guidelines of the country of use must
be respected. Unauthorised structural changes to the driven linear unit are not
permitted. We accept no liability for any damage that may arise from them.
You are authorised to assemble, operate and maintain the drive linear unit only
if:
The driven linear unit has been integrated to the complete machinery accord-
ing to the intended applications and safety requirements.
You have read the Notes on Use and Installation carefully and understood
them.
You are qualified.
You have the authorisation of your company.
You exclusively use the original accessories of the manufacturer.
In case of unsafe and inappropriate operation of the driven linear unit, there is a
danger of serious injury from crush and shear points.
Inappropriate use
The inappropriate use refers to applications differing from the use authorised
by the Notes on Use and Installation and the appropriate use. We accept no
liability for any damage that may arise.
Correct use
5. Cleaning
Close all openings with appropriate protective devices so that no detergent can
enter the system. Use no aggressive detergents. Do not use a high-pressure
cleaner for the cleaning.
6. Putting into service and maintenance
Perform the required maintenance work in the time intervals described in the
operating instructions. Make sure no connection line, connection or component
is released until the system is under pressure and tension. Secure the system
against restarting.
7. Disposal
Dispose of the product according to the national and international provisions of
your country.
