7
⌀6
20
80
42
70
90
60
34
80
You must prepare the eccentric orientation of the eccentric Bearing Units
before using the guide carriage.
Use an Allen key to turn the eccentric bolt of the rollers:
▪
Drive the bolt as far as it will go
▪
Turn back ½ a turn
▪
Continue turning back until the rearmost eccentric position is reached
When Bearing Units have been prepared and installed in this way, the maxi-
mum play between the rollers and Shafts can be used to adjust preload. When
adjusting the Bearing Units to eliminate play, ensure that no excess strain is
generated!
After making this adjustment, fix the position of the eccentric bolt by securing
the lock nut with a Pin Spanner (T). While doing so, use an Allen key to hold
the bolt in its selected position.
T = 3 Nm
Application options
Fit the End Cap and Lubricating Systems once the carriage has been adjusted
so that it is free from play.
In combination with Profile 5 60x20 as a support profile and a carriage from
Line 5:
