![background image](http://html1.mh-extra.com/html/itech/it7800-series/it7800-series_user-manual_2095277048.webp)
System-Related Functions
Copyright ©ITECH Electronic Co., Ltd.
46
5.2 Configuration Menu Reference
Press [Config] key and enter to configuration menu interface. At this interface,
user can setup the power supply output parameters, detailed parameters are
shown as follows:
DC
Config
Configuration setting for DC mode
Voltage DC
Vdc: Output voltage of DC, range from 0-
full scale
Slew Rate: Slope , range from 0-5000V/ms
DC+AC
Config
Configuration setting for DC+AC mode
Voltage DC
Output voltage of DC, range from 0-full
scale
Slew Rate: Slope , range from 0-5000V/ms
Ripple control
Wave: Select the output wave type
Vac: output voltage of AC, range from 0-
10% of full scale
Freq: frequency value
AC
Config
Configuration setting for AC mode
Balance control
Only displayed in 3-phase mode.
Balance control in 3-phase mode.
If select On, the output of ABC phase is
synchronous.
If select Off, the output is not balanced.
Voltage AC
Output voltage
Vac: output voltage of AC, range from 0-full
scale
Slew Rate: Slope , range from 0.001-
5000V/ms
Frequency
Freq: output frequency, range from 16-
2400Hz
Slew Rate: slope, range from 0.001-
5000Hz/ms