8
Ready
Measur
-e
Mode
Setup
Select
Memo
-r
y
Rel-mV
Out
Slope
Resolu
-tion
Cal
Off
On
Chapter III. General Functions
Keypad Functions
pH/ISE/mV/ORP
Key Functions
Power
used to turn ON/OFF.
Cal
used to start and set calibration,
In addition, exit in the middle of
calibration.
Ready/measure
used to change condition of meter
i.e. measure or ready.
This is used for changing from ready
to measure condition or reversing.
Mode
used to change operating modes, such
as pH, mV or ISE.
Resolution
used to change the resolution.
For pH choose 0.1, 0.01 or 0.001.
Setup
used to access the setup menu.
This is used for setting instrument
operating parameter for example,
Temperature and Data logging in
pH Setup, and Ion Buffer in ISE Setup.
Select
used to select the standard solution in ISE setup.
used to erase the memorized data.
Memory
used to store data in meter memory while measuring.
In the ready condition, used to search to the memorized data.
Slope
indicates slope after pH or ISE calibration.
Out
used to exit in setup mode.
up(
)
In setup, calibration and Data(Memory) mode, press to increase
value.
down(
)
In setup, calibration and Data(Memory) mode, press to decrease
value.
Chapter III General Functions
N eo M et
