15
Chapter IV. Setup Functions
The setup menu is used to identify and change instrument parameters.
pH/ISE/mV/ORP/TEMP Meter
pH M ode
Data Log Setup
In pH ready condition if pressing
Setup
key to enter the setup, the display is shown as
follows.
Set by using
or
key
When this setup is set ¡ on¡ , meter transmits data with time
interval of one second.
This data can be taken by communication program or printer
via RS232C interface cable.
When pH is 7.00 and temperature is 25.0
C, the following
figure is an example to print.
Temperature Setup
If temperature on display differs from a real temperature, set
a real temperature.
Set temperature by using
or
key.
If finishing setup, press
Setup
or
O ut
key to return to pH
initial display.
Chapter IV Setup Functions
N eo M et
SETUP
DATA
oFF
SETUP
25.0
C
pH 7.00 25.0
