17
Data Log Setup
Set by using
or
key
When this setup is set ¡ on¡ , meter transmits data with time
interval of one second.
This data can be taken by communication program or printer
via RS232C interface cable.
When DO is 6.00 mg/L and temperature is 25.0
C, the
following figure is an example to print.
Temperature Setup
If temperature on display differs from a real temperature, set
a real temperature.
Set temperature by using
or
key.
If finishing setup, press
Setup
or
O ut
key to return to DO
initial display.
Conductivity/TDS/Salinity/TEMP Meter
Conductivity M ode Setup
Temperature Coefficient
In the initial display of Conductivity, press
Setup
key to enter Setup and then the
display is shown as follows.
The conductivity of solution with a specific electrolyte
concentration will change in accordance with the change of
temperature. Each conductive ion has a different temperature
coefficient.
All
istek
's meters allow adjusting coefficient for the
advanced performance.
Press
or
key until the desired value is displayed.
If exiting setup, press
O ut
key to return a initial display. If
pressing
Setup
key, the next setup screen is displayed.
Chapter IV Setup Functions
N eo M et
SETUP
25.0
C
SETUP
DATA
oFF
DO 6.00 25.0
SETUP
DATA
oFF
