51
Earthcore Industries
01/2020
Isokern Maximus Linear Series Gas Fireplace
Burner Lighting Instructions
D. Do not use this appliance if any part has been under
water.
Immediately call a qualified service technician to
inspect the appliance and to replace any part of the system
and any gas control which has been under water.
Operating Instructions
1.
The Main Power switch located in the control compartment
functions as a burner and pilot override switch. When in the
OFF position, it will not let the burner or pilot to be turned on
by the remote. When in the ON position, it gives the remote
full control over burner and pilot functions.
2.
See Remote Control System on Page 41 for remote specific
operating instructions.
.
To Turn Off Gas to Appliance
1.
Turn the burner ON/OFF switch in the control compartment
to “OFF.”
2.
Turn off all electric power to the appliance if service is to be
performed.
3.
Close the main line gas shut-off valve.
WARNING:
OPERATION OF THIS APPLIANCE WHEN
NOT CONNECTED TO A PROPERLY INSTALLED AND
MAINTAINED VENTING SYSTEM CAN RESULT IN CARBON
MONOXIDE (CO) POISONING AND POSSIBLE DEATH.
Installer Instructions
It is required that the set of safety instruction labels
that have been supplied wit the appliance be affixed to
the operation and control points of the appliance. It is
the installers responsibility to ensure these warnings are
properly affixed during installation. These warning labels
are a critical step in informing consumers of safe operation
of this appliance.
Pre-Lighting Checklist
Be sure to check these items before the initial lighting of the
appliance:
o
Gas pressure has been checked carefully
o
All gas fittings have been checked for leaks.
o
All clearances to combustibles have been met
o
All combustibles materials have been removed from the
area in front of the appliance.
o
All vented areas of the appliance face are unobstructed.
o
House is ventilated to clear initial paint curing odors
o
All packaging materials have been removed from the
appliance.
o
While appliance is cool, fingerprints or other marks have
been cleaned from any plated surfaces with denatured alcohol
and a soft cloth. Marks left on these surfaces may become
permanent into the finish if not removed prior burning the unit.
o
Glass media and optional log set have been installed.
WARNING:
IF YOU DO NOT FOLLOW THESE
INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY
RESULT CAUSING PROPERTY DAMAGE, PERSONAL
INJURY OR LOSS OF LIFE.
Safety Instructions
A.
This appliance is equipped with an ignition device which
automatically lights the pilot. Do NOT try to light the pilot by
hand.
B.
BEFORE OPERATING smell all around the appliance area
for gas. Be sure to smell next to the floor because some gas is
heavier than air and will settle on the floor.
WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electric switch; do not use any phone
in your building.
• Immediately call your gas supplier from a neighbor’s
phone. Follow the gas supplier’s instructions.
• If you cannot reach your gas supplier, call the fire
department.
C.
If any portion of this appliance does not operate as the
instructions indicate, do not try to repair it, call a qualified
service technician. Do not use tools. Force or attempted repair
may result in a fire or explosion.
