Isokern 82L120 Скачать руководство пользователя

Страница: 31 / 58

Earthcore Industries

01/2020

Isokern Maximus Linear Series Gas Fireplace

The ENERVEX MFD is a low profile, automated fireplace damper. It is for use in conjunction with an ENERVEX ADC100

control and RS model chimney fan as part of the EcoDamper System. or with an ADC150 control and RS model chimney

fan as part of the IntelliDraft System. It prevents excess heat from escaping through the chimney when the fireplace is

not in use.

The MFD is designed for chimney top installations and is for use with gas fireplaces only.

The MFD is powered by a 120 or 24 VAC actuator. The actuator is interlocked to the control so it only operates when

the fireplace is in use and the fan is running. When there is a call for heat from the fireplace, the ADC100 or ADC150

control begins its operational sequence to open the damper and start the chimney fan. Once the damper opens and there

is sufficient draft in the chimney, the control releases the gas valve for fireplace operation.

The actuator has two end switches to prove damper position (open or closed) and is equipped with the Enerdrive fail safe

system to open the damper in the event of an electrical or mechanical failure.

The damper is rated for temperatures up to 575oF (300oC). The damper is sized to provide sufficient clearance between

the damper blade and the fan inlet when open. The MFD is constructed of 18 gauge, type 304 stainless steel.

System installation must conform to the requirements of the authority having jurisdiction. When required by the authority

having jurisdiction, the installation must also conform to the NFPA31, NFPA54 or NFPA211.

All electrical wiring must be in accordance with the requirements of the authority having jurisdiction or, in

absence of such requirements, with the National Electric Code, NFPA 70.

WARRANTY

2-Year Factory Warranty. Complete warranty conditions are available from ENERVEX, Inc.

COMPONENTS

Components of the MFD

(Figure 23)

are listed below:

a. Actuator / Acuator Cover

b. Stop Flange

c. Fan Adapter

d. Collar

e. Damper Blade

Enervex MFD - General Information

FIGURE 23

Содержание 82L120



























































Результаты поиска

Содержание 82L120

Отзывы:

Похожие инструкции для 82L120

Бренды по названию

Популярные бренды

Isokern 82L120, Инструкция по установке, эксплуатации, обслуживанию и руководство владельца

Результаты поиска

Содержание 82L120

Отзывы:

Похожие инструкции для 82L120

Бренды по названию

Популярные бренды