The information, technical specifications and dimensions contained in this booklet represent the
latest available data at the time of going to print. The occurrence of misprints and other errors
cannot, however, be completely ruled out. We thank you in advance for bringing such errors to
our notice and we welcome any improvement suggestions you may have.
We are obliged to draw your attention to the fact that the software and hardware brand names
and trade marks appearing in this booklet are protected under patent.
All rights reserved. No part of this booklet may be reproduced, electronically processed,
duplicated or distributed in any form whatsoever (printed out, photocopied, etc.) without the
written permission of
isel Germany AG
.
isel Germany AG
isel Germany AG
isel Germany AG
isel Germany AG
machines and controllers are CE compliant and labelled
accordingly. This equipment must not be operated until the CE safety guidelines
applying to all associated machinery parts and components have been
fully complied with.
isel Germany AG
isel Germany AG
isel Germany AG
isel Germany AG
accepts no liability for damage to equipment or malfunction
where modification has been made to the controller.
The EMC test is only valid for CNC control panels with original ex-works
configurations.
Manufacturer:
isel Germany AG
Buergermeister-Ebert-Straße 40
D-36124 Eichenzell
Tel.: +49 (0) 6659 981-0
Fax: +49 (0) 6659 981-776
Email:
http://www.isel.com
Article No. : 371100 1000
(original operating instructions)
Date of issue: 06/2014_RL
Technical specifications may change without prior notification.
Current operating instructions and equipment manuals can be downloaded at:
www.isel-data.de/manuals
